Beaudesert Exhaust - FORD RANGER 3.2L 2016-Current PXII & PXIII Turbo Diesel Exhaust With DPF
*Contact us on (07) 5549 1972 for current lead times* Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Ford Ranger with DPF. RuggedRugged is our...
*Contact us on (07) 5549 1972 for current lead times*
Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Ford Ranger with DPF.
Rugged
Rugged is our standard stainless steel system which is left as a raw finish.
Ultimate
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.
This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws. This exhaust system will only fit the 3.2L and not the 2.0L Bi-Turbo or Ranger Raptor.
A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.
The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.
We have found through research and development that a 2 ¾” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:
- Exhaust starts after Diesel Particulate Filter to comply with ADR laws
- Perforated straight through resonator as standard
- No muffler pipe is available as an additional pipe for a louder note
- This system can be purchased with no mufflers – designed for off road use only – Beaudesert Exhaust recommends purchasing a muffler or resonator then add the no muffler pipe. This is for legal reasons varying from state to state
- 2 bolt 10mm 304 grade stainless steel flange plates
- Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
- Systems are available in Rugged Range or Ultimate Range (304 grade polished stainless steel)
- Zinc plated locking nuts and bolts
- Fitting Kit and easy to follow instructions
- Boxed and bubble wrapped for freight
- Freighted Australia wide with insurance in a prompt time frame
Options for exhaust
The no muffler pipe is a replacement pipe that bolts in place of the resonator to gain maximum note.
You can also change the look of your exhaust with our tailpipe options: (standard tailpipe included)
Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.
Would you like your system fitted?
We can help with all fitting needs, here at 6/14 Hopper Avenue, Ormeau, QLD, 4208.
Fitment for this system requires 2 hours.
Fitting will be charged on the day of your appointment. If you would like a quote or to book your car in, please call us on (07) 5549 1972.
We frequently sell out of stock on our website and we want to make sure you are aware of our fulfilment capabilities.
Below are the key messages you'll see on our product pages regarding our stock:
ADD TO CART - NEXT DAY SHIPPING - We've got this in stock in our warehouse
BUY NOW - AUSTRALIAN STOCK - This is in stock in our Aussie suppliers warehouse and we'll dispatch to you within days
SPECIAL ORDER OR CURRENTLY OUT OF STOCK - Not in stock and we'll need to contact the supplier for an ETA. If this is something we normally stock in our warehouse, we'll make sure you are emailed when it is available again
If you have any questions, please email or call: