Beaudesert Exhaust - Suitable for HOLDEN COLORADO 2012-2016 RG 2.8L 4 Cyl Turbo Diesel Exhaust

From $1,449.00

*Contact us on (07) 5549 1972 for current lead times*   Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Holden Colorado RG non DPF.   Rugged Rugged...

Range: Rugged

Range: Rugged
Rugged
Ultimate

Muffler Options: Resonator

Muffler Options: Resonator
Resonator
No Muffler
Oval Muffler
$1,549.00

SKU:
Description

*Contact us on (07) 5549 1972 for current lead times*

 

Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Holden Colorado RG non DPF.

 

Rugged

Rugged is our standard stainless steel system which is left as a raw finish.

Ultimate

Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.

 

Does your car have turbo lag or lack that pulling power? The factory exhaust restricts the airflow that is coming from the turbo. The pipes are too small and the components are not letting the engine breathe to the best of its ability. Majority of this can be solved with a new exhaust from the back of the turbo.
You will gain anywhere up to 8-12% improved performance just by letting the airflow out of the motor. Turbo lag will reduce resulting in better low down torque and giving you more pulling power out of the top of the rev range.

 

Be careful! Having an exhaust system too large for the motor can have the opposite effect! We have had some customers come back to us with aftermarket exhausts that are too big for the motor and in turn it has given them more turbo lag and less overall power gains. On some motors if the exhaust is too big you can run into some problems including over boosting or even boost spike of the turbo which will throw you into limp mode. This can be extremely dangerous if you are towing a caravan or trailer. This can happen from the turbo trying to spin too hard and fast, the ECU recognises this and can throw the car into limp mode.

 

We have found through research and development that a 2 ¾” exhaust system performs better than any other size for this vehicle. Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.

Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:

  • Replacement Dump Pipe off turbo – 2mm wall thickness
  • 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
  • Ceramic coating of dump pipe standard
  • Euro 3 Standard 200 cell hi-flow Catalytic Converter – meets all emissions standards without restricting gas flow
  • Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
  • Perforated straight through muffler or resonator as standard
  • No muffler pipe is available as an additional pipe for a louder note
  • This system can be purchased with no mufflers – designed for off road use only  Beaudesert Exhaust recommends purchasing a muffler or resonator then add the no muffler pipe. This is for legal reasons varying from state to state
  • 2 bolt 10mm 304 grade stainless steel flange plates
  • Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
  • Systems are available in Rugged Range or Ultimate Range (304 grade polished stainless steel)
  • Zinc plated locking nuts and bolts
  • Fitting Kit and easy to follow instructions
  • Boxed and bubble wrapped for freight
  • Freighted Australia wide with insurance in a prompt time frame

Options for exhaust

Ceramic coating of the dump pipe is standard (Please note: There may be a delay with your order for the coating)

Changing the standard oval muffler to a small cylinder resonator for a louder note is at no charge.

The no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note.

 

Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.

Would you like your system fitted?

We can help with all fitting needs, here at 6/14 Hopper Avenue, Ormeau, QLD, 4208.

Fitment for this system requires 2 hours.

Fitting will be charged on the day of your appointment. If you would like a quote or to book your car in, please call us on (07) 5549 1972.

Shipping Timeframes

We frequently sell out of stock on our website and we want to make sure you are aware of our fulfilment capabilities.

Below are the key messages you'll see on our product pages regarding our stock:

ADD TO CART - NEXT DAY SHIPPING - We've got this in stock in our warehouse

BUY NOW - AUSTRALIAN STOCK - This is in stock in our Aussie suppliers warehouse and we'll dispatch to you within days

SPECIAL ORDER OR CURRENTLY OUT OF STOCK - Not in stock and we'll need to contact the supplier for an ETA. If this is something we normally stock in our warehouse, we'll make sure you are emailed when it is available again

If you have any questions, please email or call:

admin@innovative4x4.com

(07) 5549 1972