Beaudesert Exhaust - Suitable for TOYOTA LANDCRUISER 2016-Current 70 Series Double Cab 4.5L V8 Turbo Diesel Exhaust With DPF
*Contact us on (07) 5549 1972 for current lead times* Beaudesert Exhaust’s full mandrel bent exhaust system to suit the Toyota LandCruiser 70 Series Double Cab with DPF. Rugged Rugged...
*Contact us on (07) 5549 1972 for current lead times*
Beaudesert Exhaust’s full mandrel bent exhaust system to suit the Toyota LandCruiser 70 Series Double Cab with DPF.
Rugged is our standard system which is made out of 441 grade stainless steel tube.
Ultimate is our premium system which is made out of 304 grade stainless steel tube that we polish in-house.
Exhaust will fit around larger shock absorbers, larger tires and replacement rear long range fuel tanks. Toolboxes behind the wheels need 135mm minimum clearance from inside of toolbox to chassis rail.
The oxygen sensor is fitted back into our exhaust in the exact same place as factory exhaust. This exhaust will not fit with belly auxiliary long range fuel tanks.
This exhaust starts after the Diesel particulate filter (DPF) to comply with ADR laws.
A Diesel Particulate Filter (DPF) reduces the emissions from diesel fuelled vehicles. The filter traps diesel soot and once it is full it must be cleaned. This occurs through a process called “regeneration”, where the diesel particles are burnt off at high temperatures.
The DPF is not the only restriction in your exhaust. The factory pipe size and muffler both contribute to some loss in power and torque. On the factory exhaust system the airflow is restricted by the chambered internals of the muffler, as well the reduced size tube on each end. For vehicles fitted with a DPF our exhaust kits come standard with a small resonator this gives your vehicle the best airflow.
Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle. Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle.
Mandrel bent, welded and manufactured in our workshop in South East Queensland, this high quality exhaust system includes:
- Exhaust starts after Diesel Particulate Filter to comply with ADR laws
- Perforated straight through resonator as standard
- No muffler pipe is available as an additional pipe for a louder note
- This system can be purchased with no mufflers – designed for off road use only – Beaudesert Exhaust recommends purchasing a muffler or resonator then add the no muffler pipe. This is for legal reasons varying from state to state
- 2 bolt 3″ and 3 bolt 3 1/2″ 10mm 304 grade stainless steel flange plates
- Reinforced brackets with supports – 5mm 304 grade stainless steel flat bar for quality and strength
- Systems are available in 441 grade stainless steel or 304 grade polished stainless steel
- Zinc plated locking nuts and bolts
- Fitting Kit and easy to follow instructions
- Boxed and bubble wrapped for freight
- Freighted Australia wide with insurance in a prompt time frame
Options for single 3″ exhaust
Changing the standard oval muffler to a small cylinder resonator for a louder note is at no charge.
The no muffler pipe is a replacement pipe that bolts in place of the muffler or resonator to gain maximum note.
If you wish to have both muffler section and no muffler pipe, select the muffler or resonator above.
Options for single 3 1/2″ exhaust
The no muffler pipe is a replacement pipe that bolts in place of the resonator to gain maximum note.
If you wish to have both muffler section and no muffler pipe, select the resonator above.
Options for 3 1/2″ to twin 3″ exhaust
The no muffler pipe is a replacement pipe that bolts in place of the twin resonators to gain maximum note.
If you wish to have both muffler section and no muffler pipe, select the twin resonators above.
Please note: Our team will endeavour to dispatch your order as quickly as possible, however, some options when selected may require a longer fabrication time.
Would you like your system fitted?
We can help you with all of your fitting needs, here at 6/14 Hopper Avenue, Ormeau, QLD, 4208.
3″ exhaust system – Fitment for this system requires 2 hours.
3 1/2″ exhaust system – Fitment for this system requires 2 hours.
3 1/2″ to twin 3″ exhaust system – Fitment for this system requires 3 hours.
Fitting will be charged on the day of your appointment. If you would like a quote or to book your car in, please call us on (07) 5549 1972.
Chassis Extensions - 300mm + $200
Do you have a Chassis extension?
Extension piece suits – Creative Conversion, ASG, DMW
We frequently sell out of stock on our website and we want to make sure you are aware of our fulfilment capabilities.
Below are the key messages you'll see on our product pages regarding our stock:
ADD TO CART - NEXT DAY SHIPPING - We've got this in stock in our warehouse
BUY NOW - AUSTRALIAN STOCK - This is in stock in our Aussie suppliers warehouse and we'll dispatch to you within days
SPECIAL ORDER OR CURRENTLY OUT OF STOCK - Not in stock and we'll need to contact the supplier for an ETA. If this is something we normally stock in our warehouse, we'll make sure you are emailed when it is available again
If you have any questions, please email or call: